Agitation Flotation Machine

<div id="DIV1"><h3><a name="a1"></a>Introduction</h3> <p>Agitation flotation machine has the features of big lifting amount of slurry, small pressure, low energy consumption and simple structure. It is mainly used for separating non-ferrous metal, ferrous metal and non-metallic minerals and for the coarse separating and sweep separating in large and medium-sized flotation separation plants.</p> <p>&nbsp;As the working environment of the agitation flotation machine is bad, plus the improper use and normal abrasion, the belt wheel, hollow shaft and impeller of this machine will have wear and tear, which not only influences the working efficiency of the machine, but increases the production costs. For this reason, professional installation and debugging and daily maintenance of agitation flotation machine is very important.</p> <p style="text-align: center"><img alt="Agitation Flotation Machine" width="600" height="600" src="/i/image/201208141114028665734420.jpg" /></p> <p>&nbsp;The daily maintenance of agitation flotation machine includes: According to the design requirement, inject lubricating grease to the lubricating part and clean the foreign matters like bolts and cotton cloth that fall into the cell body in the installing process. Fill water to the overflow port, and on the condition that the mixing device is not started, check the installation level of the cell body and whether there is leakage. After the machine is in normal condition, start the electromotor, run it for 8 hours with empty load, check the electricity condition of the electromotor and the heat condition of the spare parts, if there is no abnormity, the machine can run with materials. The feeding should be even, neither too fast nor exceeding the required amount. When stopping the machine, it should be stopped 20 minutes after the ball mill is stopped.</p></div><div id="DIV3" style="display:none;"><h3><a name="a1"></a>Introduction</h3> <p>Agitation flotation machine has the features of big lifting amount of slurry, small pressure, low energy consumption and simple structure. It is mainly used for separating non-ferrous metal, ferrous metal and non-metallic minerals and for the coarse separating and sweep separating in large and medium-sized flotation separation plants.</p> <p>&nbsp;As the working environment of the agitation flotation machine is bad, plus the improper use and normal abrasion, the belt wheel, hollow shaft and impeller of this machine will have wear and tear, which not only influences the working efficiency of the machine, but increases the production costs. For this reason, professional installation and debugging and daily maintenance of agitation flotation machine is very important.</p> <p style="text-align: center"><img alt="Agitation Flotation Machine" width="600" height="600" src="/i/image/201208141114028665734420.jpg" /></p> <p>&nbsp;The daily maintenance of agitation flotation machine includes: According to the design requirement, inject lubricating grease to the lubricating part and clean the foreign matters like bolts and cotton cloth that fall into the cell body in the installing process. Fill water to the overflow port, and on the condition that the mixing device is not started, check the installation level of the cell body and whether there is leakage. After the machine is in normal condition, start the electromotor, run it for 8 hours with empty load, check the electricity condition of the electromotor and the heat condition of the spare parts, if there is no abnormity, the machine can run with materials. The feeding should be even, neither too fast nor exceeding the required amount. When stopping the machine, it should be stopped 20 minutes after the ball mill is stopped.</p></div>